1-Wire Sensors
The 1-Wire Temperature Sensor Set captures current temperature in residential and commercial spaces.
- small and discreet
- has double-sided adhesive tape for easy mounting
- precision temperature measuring
- temperature logging using a 1-Wire device
- can be connected to any 1-Wire device
Each sensor comes with a push connector to make the wiring easy. The sensor can be quickly mounted using clip and double-sided tape – no soldering and no screws necessary.
The 1-Wire Temperature Sensor Set is ideally suited to capture current temperatures in both residential and commercial spaces. The sensor is dimensionally so small that it can be installed and hidden in any location.
The 1-Wire sensor can be connected to any 1-wire device and is suited for the following applications:
- Precision temperature measuring in home or office
- Has double-sided adhesive tape for easy mounting
- Temperature logging using a 1-Wire device
- Suited for permanent use with Loxone 1-Wire Extension
- Suited for use with any 1-Wire Device
Each sensor comes with a push connector to make the wiring easy. The sensor can be quickly mounted using clip and double-sided tape – no soldering and no screws necessary.
Technical Data
- Can opperate under parasite mode obtaining power from data line
- Precision: +/- 1°F (14…185°F)
- Temperature range: (-67…257°F)
Downloads
Shipped in the Box
- 5 x 1-Wire Temperature Sensor DS18B20 Z+
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x 1-Wire Extension is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the extension
- 2 x 18AWG to 23AWG twister pair (solid core and shielded preferable) to connect the 1-wire sensors to the 1-Wire Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x 1-Wire Extension is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to extension
- 1 x 18 AWG to 23 AWG pair (solid core and shielded preferable) to transfer power from the Power supply to extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the extension
- 2 x 18AWG to 23AWG twister pair (solid core and shielded preferable) to connect the 1-wire sensors to the 1-Wire Extension