window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'G-ZJMPYD9EC7');
Home » Shop » Loxone » Extensions » 24V Dimmer Tree

24V Dimmer Tree

USD $91.15

Item no.: 100239

The RGBW 24V Dimmer Tree is great for setting the perfect moods around the home or building with sophisticated lighting.

  • Wireless version available: 24V Dimmer AIr
  • Compact version available: 24V Compact Dimmer Tree
  • Create amazing color lighting scenes for any occasion
  • Designed for DIN rail mounting
  • Benefit from free firmware updates
  • Take advantage of Tree wiring topology
  • Use this to control regular 24V LED Spots
  • ETL Listed

Smartest solution for lighting moods

Small size

During the development of the RGBW 24V Dimmer, careful thought was put into its compact size. It’s small enough to fit discreetly into your existing home automation set up.

Integrated

The RGBW 24V Dimmer is fully optimized for use in a smart home. Control your LED lighting by switch or smartphone, have it time-controlled or event-dependent – the choice is yours.

Lighting can do much more than just turn on/off

Unique RGBW lighting just for you

The RGBW 24V Dimmer allows for easy control of RGBW LED lighting (such as the RGBW LED Spots or the RGBW LED Strips from our Partner Store). You can dim and adjust colors to create your own personal lighting moods for every room of your home.

Installation and Configuration

Using the Loxone Tree technology the low voltage 24V dimmer can be installed and commissioned in just a few minutes.

Loxone Tree

The Loxone RGBW 24V Dimmer Tree and all other Tree products are “plug & play” and work perfectly with all Loxone components. Thanks to the flexible wiring, commissioning is completed in just a few minutes.

Technical Specifications

  • Interface: Loxone Tree
  • Power Consumption: typical 66mW, max 163mW
  • Outputs: 4 PWM outputs (max 2.1A per channel)
  • Wire length: max wire length to LED 30M (98ft)
  • PWM frequency: 123 Hz

Downloads

Shipped in the Box

  • 1 x RGBW 24V Dimmer Tree

If using the Miniserver

Components List

    • 1 x Miniserver is required
    • 1 x Network Switch or Modem required
    • 1 x 24VDC Power supply required
    • 1 x 12 or 24VDC power Supply if required for the LED lights

Wire List

    • 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
    • 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
    • 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply, the LED Power supply or Miniserver to the Tree device
    • 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Tree Link to the Tree device

If using the Miniserver Go

Components List

    • 1 x Miniserver Go is required
    • 1 x Tree Extension is required
    • 1 x Network Switch or Modem Required
    • 1 x 24VDC Power supply required
    • 1 x 12 or 24VDC power Supply if required for the LED lights

Wire List

    • 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
    • 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
    • 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Tree Extension
    • 1 x 18 AWG to 23 AWG pair (solid core and shielded preferable) to transfer power from the Power supply or the LED Power supply to Tree device
    • 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Tree Extension
    • 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Tree Link from the Tree Extension to the Tree device

Installation Diagram

Graphic or Wiring diagram of Loxone 24VDC RGBW Dimmer Tree installed. In the diagram you see the dimmer connected directly to an installed Miniserver Gen 2 and powered by a din Rail 24VDC power supply. The Miniserver Gen 2 is installed in a panel. The Miniserver Gen 2 is mounted on a din rail which is attached inside the panel. To the left of the Miniserver is a Din Rail mounted 24VDC power supply. The power supply has a wire connected to the Miniserver to provide 24VDC power. The Miniserver is also attached to a network switch which is located outside the panel on the top. To the right of the Miniserver is the 24VDC RGBW Dimmer Tree. It has an orange wire at the bottom left indicating it’s power source, and a green wire to the bottom right which is connected to the Miniserver Gen II indicating the tree communication from the Miniserver.

Go to Top