Loxone Dali Extension
The DALI Extension enables the flexible and intelligent control of DALI fittings and drivers.
- Seamless integration of DALI fittings and fixtures into your Loxone system
- Control up to 64 DALI devices
- Supports up to 16 DALI groups
- Easy and quick configuration with Loxone Config
Intelligent control of DALI
Many manufacturers of light fittings use DALI as a control interface for their products. To ensure that you do not have to compromise when choosing your favourite fittings for your lighting scheme our DALI Extension provides the seamless integration for DALI lights in your Loxone system.
Intuitive setup
The integration of the DALI Extension in your Loxone System is simple as always! DALI light fittings and drivers are automatically discovered using the search in Loxone Config and hence the complete configuration can be completed in mere minutes. Within minutes you will have set up a flexible and intelligent lighting system to create the perfect lights for any occasion.
Expand an installation
A single DALI Extension can control up to 64 DALI devices (16 groups). Should this not be enough then you can of course simply connect another DALI Extension to your Miniserver to expand your installation. The DALI Extension supports the device types 0 to 8.
Technical Specifications
- Interface: Loxone Link connection with Miniserver or Miniserver Go
- Power Consumption: max 3.2W at 64 devices
- DALI interfaces: up to 64 devices / 16 groups
- Supported DALI device types: 0-8
- Wire length: max 300m at 1.5mm
- DALI power supply: 16VDC, switchable
Downloads
Shipped in the Box
- 1 x DALI Extension
- 1 x Product Insert
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Extension
Installation Diagram
Graphic or Wiring diagram of Loxone DALI Extension installed. In the diagram you see the DALI Extension installed to the right of the Miniserver Gen 2. Both are powered by a DIN rail 24VDC power supply. The Miniserver, the power supply and the DALI Extension are installed on a DIN rail which is attached inside the panel. To the left of the Miniserver is a DIN rail mounted 24VDC power supply. The power supply has a 2-conductor wire connected to the Miniserver to provide 24VDC power. From the top of the Miniserver is also a line indicating its attachment to the LAN via a network switch which is located outside and on the top of the panel. The DALI Extension is also getting a blue cable from the Miniserver which indicates a Loxone Link Communication.