Dimmer Extension 120V
The Loxone Dimmer Extension allows you to dim all types of lighting, including LEDs, in any smart home or commercial building.
- 4 dimming channels 120V (200 watts per channel)
- universally applicable for resistive, capacitive and inductive load
- 8 digital inputs (24VDC)
- Top hat rail mounting
- ETL Listed
Description
With the Loxone 120V Dimmer Extension, you can simply dim any standard light that you have; whether standard light bulb, energy saving lamp, halogen lamp or LED. Once the extension is connected to the Miniserver there are 4 universal dimming channels that fits up to 8 digital inputs, so you can make more out of your lighting.
Technical Specifications
- Interface: Loxone Link connection with Miniserver or Miniserver Go
- Power Consumption: typical 330mW, max 360mW
- Inputs: 8 digital inputs
- Outputs: 4 dimmable outputs (trailing / leading edge)
- Power Supply for outputs: 110 to 125 VAC
- Resistive load: 0 to 200W
- Capacitive Load: 0 to 100VA
- Inductive Load: 50 to 200VA
Downloads
Shipped in the Box
- 1 x 120V Dimmer Extension
- 1 x Loxone Pocket Guide
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Extension
Installation Diagram
Graphic or Wiring diagram of Loxone 120V Dimmer Extension installed. In the diagram you see the 120V Dimmer Extension installed to the right of the Miniserver Gen 2. Both are powered by a DIN rail 24VDC power supply. The Miniserver, the power supply and the Dimmer Extension are installed on a DIN rail which is attached inside the panel. To the left of the Miniserver is a DIN rail mounted 24VDC power supply. The power supply has a 2-conductor wire connected to the Miniserver to provide 24VDC power. From the top of the Miniserver is also a line indicating its attachment to the LAN via a network switch which is located outside and on the top of the panel. The 120V Dimmer Extension is also getting a blue cable from the Miniserver which indicates a Loxone Link Communication.