Loxone DMX Extension
The DMX Extension allows you take total control of even the most sophisticated lighting, especially LEDs. DMX is a lighting standard that allows you to switch, dim, change colors and so much more!
- Individual lighting scenes
- Color changes
- Dimming
- 128 channels
- ETL Listed
DMX control – Intelligent control of light
The DMX extension provides you with digital DMX control of your lighting for any residential or commercial projects. Control dimming, color and more for all your DMX equipped lighting. It pairs well with your LED Strips to create impressive lighting scenes. Simply connect the Miniserver to the DMX extension and control your DMX devices.
The Highlights
One DMX controller for all DMX devices
With the DMX controller you control the entire DMX lighting, simple and intelligent thanks to the scalable Miniserver structure.
Simple operation & integration
You can set up your DMX lighting quickly and easily with our free configuration software. Control and automate it with the Miniserver simply by pressing a button or directly in the app.
Technical Specifications
- Interface: Loxone Link connection with Miniserver or Miniserver Go
- Power Consumption: max 60mW
- DMX interface: up to 128 channels
- DMX protocol: DMX512
- Wire length: max 500m wire length
Downloads
Product Datasheet
Product insert
Declaration of conformity
Declaration of conformity CZ
ETL Certificate
Shipped in the Box
- 1 x DMX extension
- 1 x Wiring diagram and Quick Start Guide
- 1 x 120 ohm terminating resistor
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Extension
Installation Diagram

Graphic or Wiring diagram of Loxone DMX Extension installed. In the diagram you see the DMX Extension installed to the right of the Miniserver Gen 2. Both are powered by a DIN rail 24VDC power supply. The Miniserver, the power supply and the DMX Extension are installed on a DIN rail which is attached inside the panel. To the left of the Miniserver is a DIN rail mounted 24VDC power supply. The power supply has a 2-conductor wire connected to the Miniserver to provide 24VDC power. From the top of the Miniserver is also a line indicating its attachment to the LAN via a network switch which is located outside and on the top of the panel. The DMX Extension is also getting a blue cable from the Miniserver which indicates a Loxone Link Communication.