window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'G-ZJMPYD9EC7');
Home » Shop » Loxone » Extensions » Loxone Extension

Loxone Extension

USD $461.88

Item no.: 100002

The Loxone Extension allows you to easily expand your Loxone automation system. Simply connect an extension to your Miniserver to increase the number of available inputs and outputs.

  • Modular expansion of your Loxone system
  • 8 relay outputs
  • 12 digital inputs
  • 4 analog inputs & outputs
  • ETL Listed

The Extension provides you with more physical connections to expand your Loxone system according to your needs, just connect the Extension to the Loxone Miniserver via the Loxone Link. This modular expansion makes the Loxone system not only flexible, but more importantly, very cost-effective no matter what size the overall system. Up to 30 extensions can be connected to a single Miniserver, without compromising the overall performance. Whether it’s for a 1 bedroom apartment or a luxurious villa, with up to 30 extensions, Loxone home automation system’s modular approach fits every bill.

Technical Specifications

  • Interface: Loxone Link connection with Miniserver or Miniserver Go
  • Power Consumption: typical 1.5W, max 2.9W (all Relays on)
  • Digital Inputs: 12 digital inputs (max 100mA at 24VDC)
  • Analogue Inputs: 4 analogue inputs @ 0 to 10V, resolution 12 Bit
  • Outputs: 8 Digital outputs (relays), dry contact / 4 analogue ouputs: 0 to 10V, resolution 12 Bit
  • Inputs: 4 analogue inputs 0 to 10VDC, resolution: 0.05V or 4 digital inputs

Downloads

Shipped in the Box

  • 1 x Loxone Extension
  • 1 x Quick Start Guide and wiring diagram
  • 1 x Loxone Pocket Guide

If using the Miniserver

Components List

    • 1 x Miniserver is required
    • 1 x Network Switch or Modem required
    • 1 x 24VDC Power supply required

Wire List

    • 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
    • 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
    • 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Extension
    • 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the Extension

If using the Miniserver Go

Components List

    • 1 x Miniserver Go is required
    • 1 x Network Switch or Modem Required
    • 1 x 24VDC Power supply required

Wire List

    • 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
    • 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
    • 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Extension
    • 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Extension

Installation Diagram

Graphic or Wiring diagram of Loxone Extension installed. In the diagram you see the Loxone Extension installed to the left of the Miniserver Gen 2 (Miniserver). Both are powered by a din Rail 24VDC power supply. The Miniserver, the Power supply and the Loxone extension are installed on a Din Rail which is attached inside the panel. To the left of the Miniserver is a Din Rail mounted 24VDC power supply. The power supply has a 2-conductor wire connected to the Miniserver to provide 24VDC power. From the top of the Miniserver is also a line indicating its attachment to the LAN via a network switch which is located outside and on the top of the panel. The Loxone extension also getting a blue cable from the Miniserver which indicates a Loxone Link Communication.

Go to Top