Home > Loxone > Switches > Loxone Touch for Nano

Loxone Touch for Nano

$55.00

Item no.: 100427

With our Loxone Touch in 1-gang box size, you can declutter walls and control essential functions with a stylish and intuitive control element for new builds or retrofit. With just a tap on one of its five Touch points, you can control lighting, blinds, music and more according to the Loxone Switch Standard.

Simplified control designed for any smart home or building

With our Loxone Touch in 1-gang box size, you can declutter walls and control essential functions with a stylish and intuitive control element for new builds or retrofit. With just a tap on one of its five Touch points, you can control lighting, blinds, music and more according to the Loxone Switch Standard.

Five Touch points

When following our Loxone Switch Standard, the large central point switches between your lighting moods while the corner points adjust blinds or music respectively. However, each Touch point can be uniquely configured to meet your needs.

Using multiple taps

Following the Loxone Switch Standard, a double-tap will turn off power consumers in the room or a triple-tap will turn off the entire building. If you use your whole hand or touch multiple zones at once, the switch will trigger as a central touch zone only.

Built-in temperature & humidity sensor*

This built-in sensor allows the smart home or commercial building to react automatically to changes in temperature and humidity levels. This keeps rooms comfortable no matter the weather or season.

*The temperature & humidity sensor is only included in the Tree variant of the Touch.

How to easily integrate your Touch switch

No matter if your Touch switch is Tree or for Nano, it only takes three simple steps:

1. Power up the device

-Touch Tree:

We recommend a separate power supply for powering the sensor.

-Touch for Nano:

Connect to Nano Relay Air.

2.Search your device in Loxone Config

Open Loxone Config and connect to the Miniserver. Click on the Tree or Air Extension and look for the Touch switch in the Tree or Air monitor. Simply click, name, insert.

3. Configure your Touch points

Lighting, shading, music and more – easily configured for even easier operation. Make sure to use the Auto Config feature for the most intuitive operation. Or make a specific configuration to meet unique needs. Read about the Loxone Switch Standard.

Downloads

Product Datasheet (Coming soon)
Product insert
ETL Certificate

1 x Touch for Nano

More information coming soon.

More information coming soon.

Go to Top