Loxone Miniserver: the center of every automation project
Loxone intelligently connects all components in the smart home or commercial project, similar to how a human nervous system operates. The Miniserver reliably communicates when tasks should be performed by devices – all relating to comfort, safety and energy efficiency in the building. It learns certain behaviors and needs while considering your presence, weather and seasons to create the best possible living experience.
Flexible & expandable
The Loxone Minserver can be extended individually and with full flexibility through its Loxone Link interface. Up to 30 extensions can be connected to one Miniserver. Whether you’re planning for a private home or commercial project, the Loxone Miniserver is the reliable foundation you need to get started.
Loxone Tree Technology
New smart homes & businesses ready in record time
We developed Tree technology with a clear goal in mind: to reduce cabling and installation effort. This makes it surprisingly easy to integrate any Loxone Tree components such as any spots or Touch switches.
-Fully encrypted communication.
-Minimal energy consumption.
Loxone Air Technology
Best smart home & business solution for renovations
The possibilities of Air technology go a long way, especially for those who would like to renovate or refurbish. In any situation where you don’t want to pull cables, Loxone Air technology is the answer.
With this powerful software, you can configure an extensively automated building in just a few hours. The best part? No additional programming!
Control and monitor any Loxone building automation functions with our free Loxone Smart Home App for iOS, Android, Windows, Linux and MacOS.
- SD card slot
- LAN interface
- 8 x digital inputs 8VDC – 24VDC
- 4 x analog 0-10V inputs
- 4 x analog 0-10V outputs (max. 20mA)
- KNX/EIB interface
- Power supply 24VDC
- Loxone Link
- 8 x digital outputs 250V/5A
Shipped in the Box
- 1 x Loxone Miniserver
- 1 x 120 Ohm terminating resistor
- 1 x Instructions
- 2 x Loxone Sticker
- 1 x 4GB Micro-SD card included (We recommend using SD card from Loxone)
- 1 x Panel Recommended
- 1 x Din Rail Recommended
- 1 x Network Switch or Modem Recommended
- 1 x 24VDC Power supply Required
- 1 x Cat5 or better network Cable to connect Miniserver Gen 2 to your network or computer to program the Miniserver Gen 2
- 1 x 23 AWG to 18 AWG solid core power cable with 2 conductors to transfer power from Power supply to Miniserver Gen 2
TSB Miniserver Gen 1 installed on a Din Rail which is mounted into a panel. To the left of the Miniserver is a Din Rail mounted power supply with a wire providing power to the Miniserver Gen 1. From the top of the Miniserver is a wire going to a network switch located at the top of the panel.