Nano DI Tree
The Loxone Nano DI Tree fits into any back box. It’s ideal for integrating any switch or button, door and window contacts, etc into a Loxone Smart Home with the advantages of Loxone Tree technology.
- For the integration of momentary switches and other contact closure inputs
- Fits any back box as it measures just 38.4 x 34.2 x 10.5mm / 1.5″ x 1.3″ x 0.4″
- Fits easily into the flush box
- 6 Digital Inputs
- Uses Loxone Tree technology
- Each Digital Input can be used as a frequency counter up to 500Hz
- CE Tested and Certified
Switch It Up
If you want to be able to use Loxone Tree wiring with a switch other than one from the Loxone Tree range, this module is all you need. With the Nano DI Tree you can integrate any switch or button into a Loxone Smart Home. Inputs such as door and window
Fits Easily Into Gangboxes
With a dimension of 38.4 x 34.2 x 10.5mm / 1.5″ x 1.3″ x 0.4″, the Nano DI Tree fits easily into the smallest of US back boxes
Certified And Tested For Your Safety
Meets all safety and CE standards while maintaining a compact design.
Perfect For The Loxone Standard
With six digital inputs, the Nano DI Tree means you can use third-party switches while still benefitting from the Loxone Switch Standard (one button for lighting, two for blind control and two for music)
Technical Details
- Power Supply: 24VDC (Min 9VDC – Max 28VDC)
- Power consumption: 115mW (when all inputs are used)
- Class of protection: IP20
- 6 Digital Inputs
- Status LED
- Ambient operating temperature: 0-55 ° C / 32-131°F
- Stripped cable length: 5mm / 0.19”
- Cable diameter: 0.25-0.8 mm² / 0.0003 inch²-0.0012 inch²
Downloads
Shipped in the Box
- 1 x Nano DI Tree
- 1 x Quick Start Guide
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Tree Link to the Tree device
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Tree Extension is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Tree Extension
- 1 x 18 AWG to 23 AWG pair (solid core and shielded preferable) to transfer power from the Power supply to Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Tree Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Tree Link from the Tree Extension to the Tree device