Nano Motor Controller Air
Item no.: 100472
The Nano Motor Controller Air is a compact flush-mounted module for DC loads, which are controlled via Loxone Air technology. The configurable outputs can be used to control the speed of DC motors or dim LED lights. You can use the Nano Motor Controller Air in three different operating modes: Bidirectional motor, unidirectional motor and PWM dimming. In addition, the module has current flow detection and overcurrent detection.
- Also available in wired (Tree) version: Nano Motor Controller Tree
- 3 Operating Modes– Bidirectional Motor (1 Output, Polarity Reversal)– Unidirectional Motor (2 Outputs)– PWM Dimmer (1 Output)
- Max. Total load for outputs
– Bi- & Unidirectional: 2.1A continuous; 3.5A peak (<30s)
– Dimmer: 2.1A - Speed controlled for bi- & unidirectional
- Operating voltage 9…26VDC
- PWM Frequency:
– Bi- & Unidirectional: 1 … 10kHz
– PWM Dimmer: 400Hz - Current Flow Detection: 100 … 3500mA
- Overcurrent Detection: 100 … 3500mA
- Compact Dimensions: 40x39x20.5mm
- Integrated 150mm long connection cable
- Commissioned in record time thanks to Loxone Air technology
- ETL Listed
Flush-mounted module for integration of DC motors (polarity reversal) and LED lighting
You can choose between three operating modes with the Nano Motor Controller Air.
- In bidirectional mode, you can control one 9 … 26VDC motor and change the polarity
- In unidirectional mode, you can control two 9 … 26VDC motors (fixed polarity)
- In both modes, the speed of the motor can be controlled continuously.
You can also use the Nano Motor Controller Tree as a 1-channel PWM dimmer for 24VDC LED lamps.
Bidirectional Motor
Unidirectional Motors
PWM Dimmer
Technical Details
- Power Supply: 9 to 26VDC
- Power consumption: typical 0.22W, max. 0.28W
- Interface: Loxone Air: 868MHz (SRD Band Europe), 4 channels available, max. Power 15.1mW e.r.p., 915MHz (ISM Band Region 2), 10 channels available
max. Power 13.2mW, internal antenna - Ambient temperature: -20 to 50°C / -4 to 122°F
- Humidity: max. 95% r.H. (non condensing)
Downloads
Shipped in the Box
- 1 x Nano Motor Controller Air
- 1 x Product Insert
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Air Base Extension is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Miniserver to the Air Base Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Loxone Link to the Air Base Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Network Switch or Modem Required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
Connection Diagram
