Nano Motor Controller Tree
Item no.: 100473
The Nano Motor Controller Tree is a compact flush-mounted module for DC loads, which are controlled via Loxone Tree technology. The configurable outputs can be used to control the speed of DC motors or dim LED lights. You can use the Nano Motor Controller Tree in three different operating modes: Bidirectional motor, unidirectional motor and PWM dimming. In addition, the module has current flow detection and overcurrent detection.
- Available in wireless (Air) version: Nano Motor Controller Air
- 3 Operating Modes– Bidirectional Motor (1 Output, Polarity Reversal)– Unidirectional Motor (2 Outputs)– PWM Dimmer (1 Output)
- Max. Total load for outputs
– Bi- & Unidirectional: 2.1A continuous; 3.5A peak (<30s)
– Dimmer: 2.1A - Speed controlled for bi- & unidirectional
- Operating voltage 9…26VDC
- PWM Frequency:
– Bi- & Unidirectional: 1 … 10kHz
– PWM Dimmer: 400Hz - Current Flow Detection: 100 … 3500mA
- Overcurrent Detection: 100 … 3500mA
- Compact Dimensions: 40x39x20.5mm
- Integrated 150mm long connection cable
- Commissioned in record time thanks to Loxone Tree technology
- ETL Listed
Flush-mounted module for integration of DC motors (polarity reversal) and LED lighting
You can choose between three operating modes with the Nano Motor Controller Tree.
- In bidirectional mode, you can control one 9 … 26VDC motor and change the polarity
- In unidirectional mode, you can control two 9 … 26VDC motors (fixed polarity)
- In both modes, the speed of the motor can be controlled continuously.
You can also use the Nano Motor Controller Tree as a 1-channel PWM dimmer for 24VDC LED lamps.
Bidirectional Motor
Unidirectional Motors
PWM Dimmer
Technical Details
- Power Supply: 24VDC (Min 9VDC – Max 28VDC)
- Power consumption: 115mW (when all inputs are used)
- Ambient temperature: -20 to 50°C / -4 to 122°F
- Stripped cable length: 5mm / 0.19”
- Interface: Loxone Tree: connection with Miniserver / Tree Extension
Downloads
Shipped in the Box
- 1 x Nano Motor Controller Tree
- 1 x Product Insert
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Tree Link to the Tree device
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Tree Extension is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Tree Extension
- 1 x 18 AWG to 23 AWG pair (solid core and shielded preferable) to transfer power from the Power supply to Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Tree Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Tree Link from the Tree Extension to the Tree device
Connection Diagram
