The Relay Extension, with 16A rated relays, will switch even the heaviest loads. Together with the Miniserver you get the perfect solution for controlling, lights, heating, alarm, blinds and more.
- 14 x 16A (max 250VAC) relays you can switch 100 light bulbs or two heaters
- Excellent value: With the Relay Extension you have a truly smart controller for up to 7 sets of blinds, 14 light circuits or 14 heating zones!
- Easy setup: Simply connect to the Miniserver and the Relay Extension is immediately ready for use!
Technical Specifications
- Interface: Loxone Link connection with Miniserver or Miniserver Go
- Power Consumption: typical .7W (All relays off), Max 3.8W (all Relays on)
- Outputs: 14 digital outputs (Relays), dry contact
- Relay rating VAC: 250VAC 15A at cosφ =1 (UL) total load whole Extension max. 45A (UL)
- Relay rating DC: mac. 30VDC 16A
Downloads
Product Datasheet
Product insert
Datasheet Relay
Declaration of conformity
Declaration of conformity CZ
ETL Certificate
Shipped in the Box
- 1 x Relay Extension
- 1 x Quick Start Guide and wiring diagram
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Extension
Installation Diagram
Graphic or Wiring diagram of Loxone Relay Extension installed. In the diagram you see the Relay Extension installed to the right of the Miniserver Gen 2. Both are powered by a DIN rail 24VDC power supply. The Miniserver, the power supply and the Relay extension are installed on a DIN rail which is attached inside the panel. To the left of the Miniserver is a DIN rail mounted 24VDC power supply. The power supply has a 2-conductor wire connected to the Miniserver to provide 24VDC power. From the top of the Miniserver is also a line indicating its attachment to the LAN via a network switch which is located outside and on the top of the panel. The Relay Extension is also getting a blue cable from the Miniserver which indicates a Loxone Link Communication.