Extend your Miniserver with at RS232 interface. This allows you to control many devices: such as an A/V receiver, TV, and much more. Easily connect to the server Miniserver and send commands via the RS232 interface of the extension to a device through the RS232 port.
Technical Specifications
- Interface: Loxone Link connection with Miniserver or Miniserver Go
- Power Consumption: max 60mW
- For integration of RS232 devices
- Wire length: max 15 wire length
- Adjustable baud rate & parity
Downloads
Product Datasheet
Product insert
Declaration of conformity
Declaration of conformity CZ
ETL Certificate
Shipped in the Box
- 1 x RS232 Extension
- 1 x Wiring diagram and Quick Start Guide
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Extension
Installation Diagram
Graphic or Wiring diagram of Loxone RS232 Extension installed. In the diagram you see the RS232 Extension installed to the right of the Miniserver Gen 2. Both are powered by a DIN rail 24VDC power supply. The Miniserver, the power supply and the RS232 extension are installed on a DIN rail which is attached inside the panel. To the left of the Miniserver is a DIN rail mounted 24VDC power supply. The power supply has a 2-conductor wire connected to the Miniserver to provide 24VDC power. From the top of the Miniserver is also a line indicating its attachment to the LAN via a network switch which is located outside and on the top of the panel. The RS232 Extension is also getting a blue cable from the Miniserver which indicates a Loxone Link Communication.