Loxone Schueco Extension
Integrate Schueco TipTronic SimplySmart windows & sliding doors into buildings controlled and automated with Loxone.
At the touch of a button, windows and even large, heavy sliding doors can be opened and closed automatically. With this extension, windows and doors become an even more integral part of buildings automated with Loxone.
- Complete integration of Schueco TipTronic SimplySmart windows & sliding doors in the automated buildings
- Control of up to 30 Schueco units
- Intuitive, simple configuration via Loxone Config
The Schueco Extension allows the integration of up to 30 Schueco units such as windows & sliding doors. With the Extension, windows and sliding doors can be opened, closed, stopped and tilted automatically. You also receive feedback on the current opening percentage and the locked status.
Technical Specifications
- Interface: Loxone Link connection with Miniserver or Miniserver Go
- Power Consumption: typical 60mW
- Inputs: Schueco Unit bus: for integration of mac 30 devices
- Max wire: Max 500m wire length
Downloads
Shipped in the Box
- 1 x Schueco Extension
- 1 x Product Insert
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Loxone Link to the Extension
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Extension
Installation Diagram
Graphic or Wiring diagram of Loxone Schueco Extension installed. In the diagram you see the Schueco Extension installed to the right of the Miniserver Gen 2. Both are powered by a DIN rail 24VDC power supply. The Miniserver, the power supply and the Schueco Extension are installed on a DIN rail which is attached inside the panel. To the left of the Miniserver is a DIN rail mounted 24VDC power supply. The power supply has a 2-conductor wire connected to the Miniserver to provide 24VDC power. From the top of the Miniserver is also a line indicating its attachment to the LAN via a network switch which is located outside and on the top of the panel. The Schueco Extension is also getting a blue cable from the Miniserver which indicates a Loxone Link Communication.