Touch Decora Tree White
With our Loxone Touch in 1-gang box size, you can declutter walls and control essential functions with a stylish and intuitive control element for new builds or retrofit. With just a tap on one of its five Touch points, you can control lighting, blinds, music and more according to the Loxone Switch Standard.
- Also available in Air (wireless) version: Loxone Touch Decora Air for Nano
Simplified control designed for any smart home or building
With our Loxone Touch in 1-gang box size, you can declutter walls and control essential functions with a stylish and intuitive control element for new builds or retrofit. With just a tap on one of its five Touch points, you can control lighting, blinds, music and more according to the Loxone Switch Standard.
Five Touch points
When following our Loxone Switch Standard, the large central point switches between your lighting moods while the corner points adjust blinds or music respectively. However, each Touch point can be uniquely configured to meet your needs.
Using multiple taps
Following the Loxone Switch Standard, a double-tap will turn off power consumers in the room or a triple-tap will turn off the entire building. If you use your whole hand or touch multiple zones at once, the switch will trigger as a central touch zone only.
Built-in temperature & humidity sensor*
This built-in sensor allows the smart home or commercial building to react automatically to changes in temperature and humidity levels. This keeps rooms comfortable no matter the weather or season.
*The temperature & humidity sensor is only included in the Tree variant of the Touch.
How to easily integrate your Touch switch
It only takes three simple steps to setup your touch decora tree:
1. Power up the device
We recommend a separate power supply for powering the sensor.
2.Search your device in Loxone Config
Open Loxone Config and connect to the Miniserver. Click on the Tree or Air Extension and look for the Touch switch in the Tree or Air monitor. Simply click, name, insert.
3. Configure your Touch points
Lighting, shading, music and more – easily configured for even easier operation. Make sure to use the Auto Config feature for the most intuitive operation. Or make a specific configuration to meet unique needs. Read about the Loxone Switch Standard.
Technical Specifications
- Interface: Loxone Tree
- Power supply: 6 to 30VDC
- Power consumption: typical 89mW, max 121mW
- Touch Points: 5 touch point, capacitive touch detection
- Click feedback: yes (can turn off in software)
- Temperature detection range: -40 to 125°C / -40 to 257°F; +/- 0.5°C / 0.9°F
- Humidity Detection Range: 0 to 100% r. H. +/- 2%, (non condensing)
Downloads
Shipped in the Box
- 1 x Touch Tree
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Tree Link to the Tree device
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Tree Extension is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Tree Extension
- 1 x 18 AWG to 23 AWG pair (solid core and shielded preferable) to transfer power from the Power supply to Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Tree Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Tree Link from the Tree Extension to the Tree device
Installation Diagram
