Tree to Air Bridge
Adds Loxone Air capability to a Loxone Tree installation.
The Tree to Air Bridge is used to add or extend the Loxone Air signal in an installation. Whether you need to expand the Air range in an existing installation or introduce the option of Air altogether, the Tree Air Bridge is the go-to device.
- Fits into a conventional backbox as it measures just 38.4 x 34.2 x 10.5mm
- Facilitates the communication between the cabinet and local Air devices within its range
- Supports up to 49 Loxone Air devices.
- Can be added to an existing run of Tree cable in an installation
- Built-in Loxone Air antenna
The Tree to Air Bridge is exceptionally versatile for both new and existing installations, regardless of whether it is a residential or commercial building.
As a Loxone Partner, you can plan to include a Tree to Air Bridge in an installation where you require a reliable Air range at a distance from the main cabinet but installing a local cabinet is not an option.
Each branch of a Tree Extension can accommodate up to 50 Tree Devices and this allocation can be converted to Air devices. If the Tree to Air Bridge is installed on its own branch, it can facilitate the wireless communication of up to 49 devices in its range (the Tree to Air Bridge would already use up one allocation of the devices for the Tree branch).
Air Base Extension | Tree to Air Bridge | |
Installation Location | Cabinet | Field / Localised |
Supported Air Devices | 128 | up to 49 |
Connection | Link | Tree |
Technical Specifications
- Power supply: 12 to 28VDC
- Power consumption : typical 183mW, max. 250mW
- Power loss at max. load: max. 250mW
- Interfaces : Loxone Tree: connection with Loxone Miniserver / Tree Extension
Loxone Air: 868MHz (SRD Band Europe), 4 channels available max. Power 15.1mW e.r.p. 915MHz (ISM Band Region 2), 10 channels available max. Power 13.2mW - Humidity: max. 95% r. H. (non condensing)
- Safety rating : IP20
- Dimensions : 38.3×34.3×10.5mm / 1.50×1.35×0.41” (LxWxH)
- Maintenance & Cleaning : The device is free of maintenance and may only be cleaned with a dry cloth.
Downloads
Shipped in the Box
- 1 x Tree to Air Bridge
- 1 x Product Insert
If using the Miniserver
Components List
- 1 x Miniserver is required
- 1 x Network Switch or Modem required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver to your network or computer to program the system
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Miniserver
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from the Power supply or Miniserver to the Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver’s Tree Link to the Tree device
If using the Miniserver Go
Components List
- 1 x Miniserver Go is required
- 1 x Tree Extension is required
- 1 x Network Switch or Modem Required
- 1 x 24VDC Power supply required
Wire List
- 1 x Cat5 or better, network Cable to connect the Miniserver Go to your network or computer to program the system
- 1 x 18AWG to 23 AWG wire (solid core preferred) to ground from Power supply negative to the Miniserver Go
- 1 x 18 AWG to 23 AWG pair (solid core preferred) to transfer power from Power supply to Tree Extension
- 1 x 18 AWG to 23 AWG pair (solid core and shielded preferable) to transfer power from the Power supply to Tree device
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Miniserver Go’s Loxone Link to the Tree Extension
- 1 x 18 AWG to 23 AWG twisted pair (solid core and shielded preferable) to connect the Tree Link from the Tree Extension to the Tree device